top of page
.png)
Roof and floor panels can be used in residential, industrial and commercial buildings.
Roof and floor panels
Advantages
- quick and easy installation
- loads applied immediately after installation
- lower weight than reinforced concrete
- dimensional stability due to gluing and technical drying
- high fire and chemical resistance
- good thermal insulation
- Positive effects on the climate through the storage of carbon dioxide (CO2)
- transparent adhesive lines
- Pleasant and comfortable room climate
Technical information
Koka species - Spruce
Sizes
Height from 80 to 200 mm
Width from 300 to 700 mm
Length up to 15 meters
Strength class - GL24h, GL28h
Moisture content - 12% +/- 2%
Fire safety - D-s2, d0 and Dfl-s when used as a floor covering
Density - Depending on the strength class, on average from 450 kg / m2 to 500 kg / m3
Thermal conductivity -0.13 W /, k
Shrinkage and increase -
Characteristic value perpendicular to the fibers as a percentage with a 1% change in wood moisture glued timber from coniferous wood = 0.24
Burning - 0.65 mm / min. According to EN1995-1-2
Recommendation - Due to the risk of shrinkage and expansion and the possible formation of gaps, it is recommended to use elements in width - Visual quality 200 - 500 mm and industrial quality 500-700 mm. As the wood moisture level changes, cracks may form
Service class - EN-1995-1-1
Service class 1 - Indoors
Sevisa class 2 - Roof in the outdoor area
Floors without vibration test. Floor 3rd class
Single span beam
Two - span beam
The table only represents a feature for preliminary design and therefore does not replace the necessary static proof.
The table only represents a feature for preliminary design and therefore does not replace the necessary static proof.
bottom of page